Included:
Lakeline Sight Mounting Plate
(2) 6-32 x 1/4 Button Head Screws
(2) 6-32 x 3/8 Flat Head Screws
(1) 5-40 x 1/8 set screw
Fits the Taurus TH series rear sight dovetail. RECOMMENDED FOR 9MM PISTOLS ONLY.
Our Multi Red Dot sight mounting plates are machined from 7075 Aluminum alloy and hard anodized for high strength and light weight. This fits the: Vortex Viper/Venom, Burris FastFire, Docter and other same footprint sights like the ADE Advanced Optics RD3-006A/B, other ADE RD3 series sights, Sightmark mini shot reflex, Truglo Tru Tec Micro. In addition it fits sights with the Trijicon RMR style footprint, RMR sights plus Holosun, etc.
It does not fit the micro sights, like the Shield RMSC footprint or Trijicon RMRcc footprint.
The sight plate is the same width as the RMR footprint sights and is wider than the Venom/Fastfire footprint sights.
The rear sight on your pistol is removed and replaced with this mounting plate in order to mount your red-dot sight. No modifications to the pistol are needed. The mount can be removed and the rear sight reinstalled at any time. Mounting hardware for the red dot sight is included.
Our mounting plates are made slightly oversized so they are always a tight fit in the dovetail. That makes installation a little harder, but that is also why our sight plates hold zero, not shifting around with use. These sight plates also have precision machined bosses that engage the red dot sight and keep it from shifting around on the mounting plate.
A flat plate with a couple screw holes simply won't hold zero under use on a pistol. Those are features to look for in any quality sight mounting plate.
Gunsmith installation is recommended because fitting is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lakeline Lifetime Limited Warranty
1 Review Hide Reviews Show Reviews
-
Red Dot Mount Plate for Taurus TH9
I had a problem with the 1st plate I received. The directions called for using a torque setting of 15 inch pounds and the set screw stripped out the plate. I addressed the issue with Lakeline and they immediately sent me a replacement free of charge. The new plate installed perfectly using a torque setting of 10 inch pounds. The customer service was amazing!
