Buffered Recoil Assembly for the Standard Taurus TX22 (does not fit the Competition, Compact, nor Gen2 versions) pistol that includes:
- Fully Assembled Recoil Assembly
Available with end cap in Stainless, Black Nitride, or God (Titanium Nitride) Finishes.
Available in factory standard recoil spring weight, or +2 lbs (good for FRTs and/or Suppressors).
Lakeline Stainless Steel Guide rods have a reputation for being tough, really tough!The buffer absorbs and damps some of the shock load into the slide from the spring when firing the pistol. The polymer buffer rides against the slide, preventing anything steel from a spring or washer from riding on the soft aluminum slide as in other designs. The Lakeline LLC Buffered Recoil Assembly simply can't mark or gouge the slide on your TX22. There is nothing better to enhance the longevity of your TX22 slide.
The flat wire spring sees lower stress levels and has a longer life than round wire springs. The TX22 Guide rod and end screw are each machined from stainless steel. The proprietary buffer is a tough, shock resistant polymer.
This is an engineered system that preserves the factory specifications and function of the TX22 slide. The guide rod and springs are designed to work with the buffer to maintain the factory slide travel and minimize the forces on the slide.
The spring is precision ground on the end that engages the slide so it is very flat to prevent any undue wear on the TX22's aluminum slide. The Lakeline LLC recoil assembly, when compressed to solid height, is the same as the factory specification to prevent damage from frame and slide contact during firing. Others are not so carefully designed. Slapping a weaker, 3D printed washer in your existing TX22 recoil assembly can increase the stress on your slide.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Stainless Steel Recoil Assembly for the Taurus TX22
Lakeline Lifetime Limited Warranty
19 Reviews Hide Reviews Show Reviews
-
A great upgrade... with improvement.
This is what the TX22 factory polymer guide rod assembly needs... although I have to admit that the spring on the factory guide rod is much more uniform than the Lakeline spring. I left mine sitting the locked breech position for about a week, to see if it would make it more uniform. It made a small difference, but it's still a bit wavy. Otherwise it works as advertised.
