Lakeline Buffered Stainless Recoil Assembly for Standard Taurus TX22

Lakeline LLC

Lakeline Buffered Stainless Recoil Assembly for Standard Taurus TX22

MSRP: $39.95
$32.95
(You save $7.00 )
(14 reviews) + Write a Review
SKU:
TX-RSA-022
UPC:
810142071215
Availability:
Ships same business day if ordered before 3:30pm Central Time, or next business day
Return Policy:
30 days
Shipping Details:
Free ground shipping on orders over $100, multiple options at checkout
Installation Difficulty:
Easy. Lubrication with Gun Grease recommended.
Adding to cart… The item has been added
Buffered Recoil Assembly for the Standard Taurus TX22  (does not fit the Competition, Compact, nor Gen2 versions) pistol that includes:
  • Fully Assembled Recoil Assembly

Available with end cap in Stainless, Black Nitride, or God (Titanium Nitride) Finishes.

Lakeline Stainless Steel Guide rods have a reputation for being tough, really tough!
 
The buffer absorbs and damps some of the shock load into the slide from the spring when firing the pistol. The polymer buffer rides against the slide, preventing anything steel from a spring or washer from riding on the soft aluminum slide as in other designs.  The Lakeline LLC Buffered Recoil Assembly simply can't mark or gouge the slide on your TX22.  There is nothing better to enhance the longevity of your TX22 slide.
 
The flat wire spring sees lower stress levels and has a longer life than round wire springs. The TX22 Guide rod and end screw are each machined from stainless steel.  The proprietary buffer is a tough, shock resistant polymer. 
 
This is an engineered system that preserves the factory specifications and function of the TX22 slide.   The guide rod and springs are designed to work with the buffer to maintain the factory slide travel and minimize the forces on the slide.
 
The spring is precision ground on the end that engages the slide so it is very flat to prevent any undue wear on the TX22's aluminum slide.  The Lakeline LLC recoil assembly, when compressed to solid height, is the same as the factory specification to prevent damage from frame and slide contact during firing.  Others are not so carefully designed.  Slapping a weaker, 3D printed washer in your existing TX22 recoil assembly can increase the stress on your slide.
 
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Stainless Steel Recoil Assembly for the Taurus TX22
Lakeline Lifetime Limited Warranty

14 Reviews Hide Reviews Show Reviews

  • 5
    Taurus TX22 Spring

    Posted by Bryan Ridge on 7th Sep 2023

    I haven't shot with it yet but the gun definitely has a better feel when cycling it manually

  • 4
    Function

    Posted by Gary McClintock on 20th Jul 2023

    This recoil assembly has functioned fine so far but it makes a loud whistling noise when cycled. I oiled it per instructions and it is still loud.

  • 5
    Nice Upgrade

    Posted by Mike McCall on 25th Jun 2023

    This spring is a huge upgrade from stock Taurus unit.

  • 5
    Stainless recoil Taurus tx22

    Posted by Arturo on 15th May 2023

    night and day

  • 4
    A great upgrade... with improvement.

    Posted by Tactical Black on 11th May 2023

    This is what the TX22 factory polymer guide rod assembly needs... although I have to admit that the spring on the factory guide rod is much more uniform than the Lakeline spring. I left mine sitting the locked breech position for about a week, to see if it would make it more uniform. It made a small difference, but it's still a bit wavy. Otherwise it works as advertised.

!