Optics Ready Slide for Standard Taurus TX22

Great w rmsc footprint. Running the lakeline barrel constant golfball at 20yds. Very sleek. Pairing with a tx22 comp slide n barrel. One slide setup for iwb one slide setup for owb

Was a bit of tedious work for me to swap all the parts from taurus slide to the lakeland slide, but I got it done and it works great

Excellent quality product. Range tested with Lakeline's threaded barrel, recoil spring, and striker and have had 100% reliable and accurate usage with multiple brands of ammo. I added a Holosun 507k x2 red dot and Glock ameriglo xl suppressor sights which give a lower 1/3 witness in the red dot window. A slight note is that the top of the slide is thinner than a Glock slide so you will need to shave some material off the bottom of the front sight post in order to allow the front sight post screw to secure the front sight to the slide. This was easily done with a hand file and a touch of cold blue afterwards. Their products worked perfectly with a TK extractor and the TK trigger and trigger spring as well. Extremely happy with the products from Lakeline and would recommend them without hesitation.

Shot about 400 rounds today with the new slide without a single failure using Federal Automatch. This was with a Vortex Defender red dot sight that weighs about 3/4 ounce. Was having too much fun to verify, but it appears the standard height front sight will co-witness with the notch on the red dot sight. Installation was easy, good directions. The breech block was much tighter fit in the new slide compared to the original slide. Maybe 9000 rounds with the old slide had something to do with the different fit. Just get a brass rod and follow the instructions.

This slide is very impressive.. The work on this slide is absolutely immaculate and this high gloss aluminum really pops! This finish reminds me of my chrome Rival S. Every surface and angle on this slide is smooth and polished - you can really see the attention to detail that went into this, especially at this price. Slide parts are a perfect fit as well. Well worth the money. If you're worried about having to swap parts from your old slide well don't be, it's pretty simple with the instructions they provide. One of my best purchases so far this year, easily. If you're on the fence, get this one with confidence, you won't regret it! Thanks Lakeline!

This aftermarket slide is perfect. It not only looks great but is setup for a red dot. It is very easy to switch all your internal parts , The TX22 should have come this way originally.

When I find a product this well made I have to leave a review. Machine work was excellent as was the fit. Finish was very good too. I bought the slide for competition and it has performed very well. I feel my TX22 is now at its potential. Instructions were very good, photos were a little blurry and on the re-assemble step the insertion of the roll pin for the breach block was omitted, but carful attention to details on my part caught this. Skill level needed is moderate and a good set of punches is required. Thank you Lakeline for a nice upgrade.

This silver slide works perfect. Makes my TX22 shoot even better because of the red dot.

Machine work of slide looks good, but the finish on it looks cheap. I haven't fired it yet, and it already shows wear marks from just racking it where the barrel goes through. I hope it holds up better when I use it.