2-Piece, 9mm, Slide Profile Compensator




  • For 9mm pistols
  • 1/2 x 28 threads
  • 1.3 inches long and 0.92 inch wide
  • Aircraft grade aluminum with anodized finishes in black, silver and gold as shown.
  • Includes viton o-ring

This is a very cool compensator.  We simply refer to it as a slide profile compensator.  Its dimensions make it look great with many of the compact and micro pistols on the market.

Included is an outer that threads on to your pistol and is threaded back just far enough to clear the frame and guide rod when the pistol is cycled.  Then, an o-ring is installed on the inner (which comes in silver or gold anodize) and it is threaded on and locked in place against the outer with a 14 mm wrench or socket.

The inner has ports for gas to escape all the way around it, which are gathered up and all channeled by the outer which acts as a manifold to direct all the escaping gasses upward to best reduce muzzle flip.  The reduction in muzzle rise from this compensator is incredible for its compact size.

Plus, it is easily clocked the correct direction when it is installed!

COMPENSATOR ONLY!!!  Photos with pistols are only for illustration of how the compensator fits and looks. 

FINISHES. Metal parts that rub together or
make contact with other metal parts will get
visibly marked, scratched, or burnished. Even
very hard finishes, like the black nitride and gold
TiN finishes we use will wear and that will be
visible. All parts get scratched,
burnished, and show where they rub and touch
other parts. This is normal and is not a defect.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Additional information


Gold Anodize, Silver Anodize Finish