Recoil Assembly for the 9mm Taurus G3X, PT111-G2, G2S, G2C, and G3C pistol that includes:
- Fully Assembled Recoil Assembly
- Dual springs for less felt recoil than a single spring assembly.
Lakeline Stainless Steel Guide rods have a reputation for being tough, really tough! The Lakeline Recoil assembly is designed to be the last recoil assembly your Taurus G3X, G3C, G2C, G2S or PT111 G2 will ever need. It is designed to be maintainable so springs can be changed if or when they eventually wear out. This is NOT a throw away, that must be replaced when it needs new springs.
Spare springs are readily available for the Lakeline recoil assembly. Now fully assembled! Just field strip your pistol, lube it, and put it in.
BLACK DLC COATING on the end screw. A very hard, black, Physical Vapor Deposition finish is used on the end screw. With tens of thousands in use, these recoil assemblies have been proven for hundreds of thousands of rounds. There is simply no more reliable recoil assembly for the Taurus. No plastic, or thin drawn parts! The recoil rod is a single piece with the flange, the most highly stressed part, machined as one piece with the Guide Rod. If your pistol is jammed from a failed factory or competitor's recoil assembly
email our customer support to get instructions on how to get your pistol back apart.
Don't be TROLLED by false claims. The reason that pistol manufacturers use DUAL SPRING assemblies in compact and sub-compact pistols is that having two spring constants to work with allows better control of the recoil pulse in small pistols with short slide travel. That means less felt recoil to the shooter and reliable function. A single spring system isn't new, the 1911 was designed with one over 100 years ago! It's cheaper to only have one spring, and no sleeve. That approach just doesn't perform as well, particularly in compact pistols. The most proven, reliable and soft shooting recoil assembly for the G2 series Taurus pistols is right here.
The springs are made from the best spring wire available and carefully finished to make sure that they will not over ride themselves or the flanges they ride on. The Lakeline springs rates are also optimized and provide a smoother recoil pulse than the factory parts while still shooting all standard rounds reliably. You don't have to select a light spring, that doesn't tolerate heavy loads, nor a heavy spring, that may not cycle regular range ammo with the Lakeline recoil assembly. By optimizing the spring rates, choosing spring material that doesn't weaken under use as much as typical and using better spring and sleeve lengths, this recoil assembly provides lighter recoil with range ammo all the way to +P rounds.
Assembled recoil assembly only. Pistol is shown only for illustration purposes and is not included.
FINISHES.
Metal parts that rub together or make contact with other metal parts will get visibly marked, scratched, or burnished. Even very hard finishes, like the black nitride and gold TiN finishes we use will wear and that will be visible. Stainless parts will also get scratched, burnished, and show where they rub and touch other parts. This is normal and is not a defect.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Stainless Steel Recoil Assembly for the Taurus PT111-G2
